AMON Compact and Active USB Audio Interface INFRASONIC, a leading worldwide provider of digital musical instruments is proud to introduce our newest product, the AMON USB recording interface. This AMON is a two channel USB interface that can features a high quality microphone preamp, a line level/instrument input, and MIDI I/O. One reason our AMON is so suited to portable recording is because the AMON is USB bus powered. This means that the AMON requires no extra power cables or wall warts and that its power is provided by the USB cable. The USB 2.0 connection supports data transfer speeds of up to 480Mbps for effortless recording and the signal to noise ratio is in excess of 100dB. With a full list of features and a reasonable price, the AMON is one of today’s best values in USB interfaces. Like all of INFRASONIC’s products, the AMON comes with a 1 year manufacturer’s warranty.
Audio /MIDI Interface USB 2.0 24 bit / 96 kHz outbox type Audio Interface with MIDI
MIC pre-amp (TRS phone jack) with peak LED, gain control;
Line/Hi-Z input (TS phone jack) with peak LED, gain control;
2 unbalanced inputs with RCA jack - A/D converter: SNR 102dBA;
2 unbalanced outputs with RCA jack - D/A converter:SNR 108dBA;
Supports up to 24-bit/96kHz;
1 x MIDI I/O;
Small design featuring a heavy duty aluminum case;
Bus-powered with USB link LED;
Supports zero latency direct hardware monitoring.
SPECIFICATIONS: SAMPLE RATE SUPPORTS 44.1, 48, 88.2, 96 kHz ANALOG LINE INPUT
Input type : Line input 1,2
Connector type : 1/4" TS phone jack
Peak level : 0dBFS @ +6dBV
Impedance : About 10KΩ
MIC INPUT
Input type : MIC input for dynamic microphone
Connector type : 1/4" TRS phone jack
Preamp gain : +60dB (TBD)
Peak level : 0dBFS @ 20Mv
Impedance : About 1KΩ
Hi-Z INPUT
Input type : High impedance input for instrument
Connector type : 1/4" TS phone jack
Peak level : 0dBFS @ +0dBV
Impedance : About 1MΩ
ANALOG OUTPUT
Output type : Line output 12
Connector type : 1/4" TS phone jack
Peak level : +0dBV @ 0dBFS
Attenuation : -64dB ~ +0dB(0.5dB step size)
Impedance : Less than 30Ω
HEADPHONE OUTPUT
Output type : Headphone amplifier
Connector type : 1/4" TRS(stereo) phone jack
Load impedance range : 32-300Ω (for the best performance)
